METAL GARDEN HOSE QUICK DISK CONNECT FULL

However, keep in mind that, ideally, the pump should be situated right next to the source.

If, for example, a horizontal distance needs to be bridged, you will be able to extend the suction hose by a few metres, and you are advised to do so with a hose of the same diameter. What do you need to do if the pump is not situated right next to the source? Our suction hoses have a standard length of four and seven metres, but can be lengthened by connecting one or more additional suction hoses to each other. This means that - measured from the pump - this is the maximum depth at which it can be immersed in water. All these types of pumps have a limited suction depth, which has been set at eight metres. Of course, we aim to help you as much as possible to make choosing easier for you.Ī garden water pump is self-priming, which means that it draws in water through a suction hose and is able to pump the water under a certain pressure. To select the right garden water pump, it is good to know what you need to take into account. We carry high-quality brands with a variety of applications, and usually with the best price-quality ratio. However, if you are looking for a very specific garden water pump, we can usually arrange this as well, thanks to our close cooperation with the manufacturers. The great thing about this is that we can provide the right pump for any situation. To make things easier for you, we have made a selection of water pumps taking into account situations that you may be faced with, and provide you with a list of all the garden water pumps that we have in stock. Therefore, a garden water pump is a multifunctional device for in and around the house, and they come in a wide range of capacities. In addition to supplying water for irrigation or filling purposes (certain tanks, ponds, wells, etc.), garden water pumps are also suitable for rapidly draining vast amounts of water: for example, if you want to empty your swimming pool or maintain a pond. More information about the combination with an active system can be read below. Connecting it to a sanitary appliance is only possible by making use of an active system, which can be easily mounted onto the garden water pump.

You only need to connect the device to your own sprinkler network or sanitary appliances. In some cases, we supply a hose and filter to make it even easier for you to get started immediately. In principle, garden water pumps are easy to install, and should in fact be connected to a source and, if possible, to a system. However, if this situation occurs, the hose/pipe only needs to be vented.

METAL GARDEN HOSE QUICK DISK CONNECT FULL

When air is trapped in the suction hose/pipe, the pump will be unable to process the water adequately, and will not run at full capacity. In all instances, it is very important that the entire 'circuit' be sealed airtight. The pump is supplied with water via the suction connection, to which a suction hose is connected to draw water from a well, a canal, a ditch or a pond, where the hose end is immersed in the water. These water pumps are fitted with a suction connection that is usually situated at the front and a delivery connection on the top. This type of pump is popularly known as a groundwater pump. A garden water pump is a self-priming pump that is often used for 'irrigating' a garden or lawn, but also for supplying water for toilets, washbasins, washing machines, and so on.

Metal garden hose quick disk connect